• The sand of cubical particles and rounded edges particles can be manufactured.
• Silt and soil free clean sand.
• Sand of any grade can be manufactured, only by changing the sieve of the screen grade of the 
  sand can be   changed. Capacity of the machine if given anywhere should be taken for grade 1 
  sand. For finer sand, capacity of   the machine will decrease accordingly.
• In comparison with river sand machine made sand is having more compressive strength.
• The workability of the mortar increases due to the rounded edges of the sand made by this 
  machine: hence less   water cement ratio is possible.
• There are no impurities such as mud, soil, silt, hence less permeability.
• No harsh concrete or honey combs in the concrete, due to better plasticity.
• Very nice finish can be achieved in the work.
• Fine particles of the dust can be removed by controlling the air draft.
• The dust separated is very fine and can be utilized as Sanala (mixing with 1:10 cement), for 
   manufacturing cement   tiles, or can be used for burnt brick making. (Soil required for brick making 
   is not easily available. Hence it gives a   better substitute for soil. The bricks made out of dust    are strong compared to ordinary mud bricks.)
• The capacity of the machine is based on the hardness of the rock and feed size and the HP    available. Softer rock   and smaller the feed size increases the production.
• The fine dust can also be used for tiles manufacturing, for cleaning powder in stead of
   dolomite powder.
• The Sand can be manufactured from stone Grit, which is a waste at stone crusher unit or bigger 
   articles from   riverbed. The Grit is mainly used in Road making in seal Coat. The consumption is    very less,compared to the   production every stone crusher produces about 15% Grit. It is    headache to the crusher owners. It requires huge   space for storage, and turnovers are very less.    The grit can be economically used for Sand Manufacturing. It is   readily available on all crushers    at throw away price. . The yield of the sand from Grit is approximately. By Weight. By   Volume.    Sand   84%72% Dust 16%31%
• The powers required for the manufacturing of100 cft. Of sand from grit i) For Cubical sand 
   approximately 13 units. This data is variable according to feed size, voltage stability, hardness of    the Stone.
• The complete plant is fully automatic. Only one operator for starting, stopping, And routing 
   maintenance, Greasing   etc. is required. One or two Helpers to Clean the space, to collect thrown 
   away particles in process etc. are required.