( PATENTED )
Highlights of Our Machines
- Our machines are warranted for three years. Except for wear parts, bearing, and rubber parts.
- Our machines can take feed size from zero to 40 mm model wise. The feed size is based on final product required. Sand can be manufactured from 40mm feed material. For better quality of sand we must aware to 1 :4 crushing size. This means for zone 1 sand maximum feed size should not be more than 20mm. For better result 0 to 20mm all mixed will be ideal feed. For manufacturing plaster sand feed size should be 0 to 8mm. If the feed size is maintained within above said limit, maximum efficiency of the machine can be achieved.
- The most economical crushing ratio is 1 : 4 may be increase as 1 : 5. This ratio will reduce the wear cost to minimum.
- We manufactured VSI Crusher from 30 tons per hour to 300 tons per hour through put capacity.
- All Types of Industrial minerals and recycling waste can be crushed in our VSI. The wear cost varies as per the hardness of material and abrasive quality.
- All our VSI and Sand Making Machine ( Premier Model ) are having full proof oil Lubrication system. This Lubrication system is most efficient
- All our VSI Crusher, Rotopactor, Sand Making Machines are available with Dust Free Product System. This system is optional. For better quality of the product we recommend this system.
Proven Application on:
- Our Machine is proven for all types of Industrial minerals and Constructional waste and debris.
- All Types of Stones such as Basalts, Dolomite, Flint, Gabbros, Gravels, Grit stone, Lime stone, Phosphate, Pumice, Quartz, Jasperoid, Quartzite, Sand stone, Silt stone, etc. can be crushed in our VSI.
- Industrial Minerals: Such as Quality sand, Ceramics, Abrasives, Cement Clinkers, Glass, Silica, Manganese ore, Iron ore, etc. can be successfully crushed.
- Waste and recycling: Such as Glass, Steel slag, Construction Waste, etc. can be crushed.