Artificial Sand Making Machines
Constructional Machines
VSI Crushers
VS Rotopactor
Bajree Sand
Costing of Machine Made Sand
Sand is manufactured from "Grit", which is by product of stone crusher. While crushing, the size below 6 mm is manufactured, which is sieved and separated from the metal. It is not used much in the construction industries. The consumption of the 'grit' is very less compared to the production. Hence, it is available at very cheap rate. 

The sand plant is specially designed for manufacturing sand from the grit.
It is a better utilization of the material.

Conversion: 1 Brass = 100 CFT = 2.83 Cub Mtr. (5.2 Tons Approx)
COSTING : ( Artificial Sand )
1. Grit required per brass 100 cft. sand is 120 cft @ 200 Rs. 240.00
2. Wear and tear of ROTOPACTOR per brass of sand Rs. 40.00
3. Misc. Expenses Rs. 05.00
4. Power charges required per brass of sand=17 units @ 5 per unit ( on higher side ) Rs. 85.00
5. Labor charges per brass of sand say Rs. 25.00 Rs. 25.00
Manufacturing cost ( Production Cost ) Rs. Rs 395.00
6. Depreciation on complete plant assuming total expenses in Rs. 70-00
installation, M.S.E.B. power connection civil work etc.
is 20,00,000 @ 25 % per annum, therefore per brass say
Rs. 70.00
7. Interest on working capital @ 13.0 % per annum (working capital assumed to be 24,00,000.00 ) Rs. 45.00
8. Other exp such as salary of Clark, Phone, stationery etc Say Rs. 15.00
If working on two shift basis the cost per brass comes to : Rs. 468.00
Total Cost Per Brass of Sand Comes to Rs. 525.00
Hence adding 30% profit selling price may be Rs.683.00 per brass + carting charges.
NOTE : This calculations is done assuming 80% efficiency of the machine utilized. 
All calculations are for guide line.
The production of the machine is a factor of feed size, 
speed of the machine (voltage), hardness of the feed material and mainly on H.P. Available.
All information given are in good faith, should not be taken as binding in every respect.
© 2012 AKASHGANGA All Rights Reserved