Our Machines |
Other
Make Machines |
1) Our machine bears a warrantee
for Three
years. |
1) Nobody gives more than one
year. |
2) Rotor life of our machine is
more cost is 2,500
working hours, wear cost is much less ( For 15 tons machines) wear cost Rs 2.40/ Ton |
2) Rotor life of other make is not
more than Wear 900
working hours. Wear cost is more. |
| 3) Production of Sand
per H.P. is 10% excess than any machine.
HP required 3.6 HP/ Ton |
3) Less production per
H.P. Hp required more than 5 HP/ Ton |
| 4) Oil lubrication system, which is
a full proof , Better Lubrication,
due to oil
pump |
4) Grease Lubrication system
requires
Constant intermittent lubrication. |
| 5) Heat generated in the bearings is taken away by the circulating lub
oil, gives long bearing life |
5) Heat is not taken out, so in
summer it requires to close the unit, for cooling. This
also reduces the bearing life. |
| 6) Special floating design of
bearing is in the system, which counter balances
the weight of the shaft and Rotor. Bearing life is three times compared to other machines |
6)
Total load is on the bearings, less life of the bearings. More bearing failure
is experienced. |
| 7) Annual expenses for lubrication
is not
more than Rs.8,500.00. Which Saves
Rs 15,000.00 per year. |
7) Annual expenses on lubrication
is Rs. 23,500.00
Which is much high. |
8) No time wasted in lubrication,
so more utilization of time and more production
, so 8/9 Tons extra
Production,
which can increase total Profit
up to 1,00,000.00 per year. |
8) Per day at least 30 minute
are required for lubrication, so per day Less production at least 8 to 9 Tons Hence less profit. |
| 9) The top lid is having 360 d
swiveling against a pivot.Easy to open in less time. |
9) Top cover requires crane or
chain Pulley block.More time Is required to open the cover. |
| 10)The Motor is having a specially designed tightening arrangement Operated
by a handle, Makes easy to operate. |
10) Requires much efforts to loose
or
tight the belts. |
| 11) The Main shaft is specially designed
and made from special steel, which gives more fatigue life. |
11) No special design, experiences more frequent breakage
of the shaft And so bearings |
| 12) A special vibration detection and Control equipment is fitted with the Machine, which do not permit
to Run the machine, under vibration. |
12) No such unit is fitted |
| 13) A special temperature meter and control unit is fitted with the machine which indicates rise in the
temperature of the bearings, so protect
the bearings and increases the life. Estimated bearing life about 10 years |
13) No such unit is fitted. |
| 14) A hour meter is fitted with the machine,
which shows actual running of the machine. |
14) No such unit is fitted. |
| 15) A provision for dust suction
system is provided to suck extra dust from the sand. ( fitting of dust unit is optional). |
15) No such arrangement can be made |
